Zhone 4821-A2 Guide d'installation télécharger pdf (Page 20)

1. Installation

1-10 July 2004 4821-A2-GN21-10

Installing the BitStorm 4800 Express on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully cabled

unit. These are not included. Use at a minimum 1/4-inch (6 mm) diameter screws

in 3/4-inch (19 mm) plywood (not drywall).

Procedure

To install the BitStorm 4800 Express on a wall:

1. Identify the flat-head screws provided in the hardware kit and the brackets

suitable for a 23-inch rack. Two screws are required for each bracket.

2. Orient the unit so that the bottom is facing you and the faceplate is at the top.

3. Locate the supplied Right Side mounting bracket and fasten it to the right side

of the unit.

4. Locate the supplied Left Side mounting bracket and fasten it to the left side of

the unit.

5. Tighten all screws firmly.

04-17527

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Pas de commentaire

Zhone 4821-A2 Guide d'installation Page 20